Linksys WRT120N is a wireless router that can be used for many purposes. One of the most common reasons to use this device is to set up a wireless network in your home or office.

This article will walk you through the process of logging in and setting up your Linksys WRT120N so that you can get on with what’s essential, like streaming movies and playing video games!

What is Linksys WRT120N?

The Linksys WRT120N is a wireless router that allows you to connect your computers, printers, and other devices into one network. If purchased separately, the device then broadcasts this network connection throughout the building with its built-in antennas or via an external antenna.

This router has multiple security features that aid in protecting your data and privacy while you are online. WPA2 security, a Stateful Packet Inspection (SPI) firewall, and NAT technology are its security features. 

The supplied browser-based utility makes it simple to configure the router. This router has a built-in security system for added protection and many advanced features. However, you may need to set up and log in to the router first to access those features.

How to Login Linksys WRT120N

Logging into your router is crucial to access your router settings and modify some of your router features. When logged in successfully, the first settings you need to change on your router are the Wi-Fi name, SSID, and password. These settings are essential for your network security. 

To perform this:

1. Launch a web browser on your computer to access the router web-based interface.
2. Enter the router’s default IP address, 192.168.1.1, in the Address box to access the browser-based application.
3. Then hit the Enter key.
4.  Use the default password admin the first time you use the browser-based application. From the Administration > Management page, you may create a new password. To proceed, click OK.
5. Access your router settings and modify some of your router features. The first settings you need to change on your router are the Wi-Fi name, SSID, and password. 

Changing the Network Name or SSID

Your router comes with a default username and password once newly purchased. However, it is not required to change the network name or SSID, but it would be safer for you. Changing your SSID and password will prevent security problems.

To perform this:

Step 1: Log in to the router.

Step 2: When the router’s interface page opens, click Wireless.

Step 3: Under Wireless > Basic Wireless Settings page, select Manual.

Step 4: Find the Network Name (SSID) and change it to your desired name.

Step 5: Click Save Settings to save changes.

Changing Linksys WRT120N Password

The Linksys WRT120n is a router many people have trouble accessing, but it doesn’t have to be this way. Aside from changing the SSID, you may also need to change your password.

To perform this:

1. Login to the Linksys WRT120N.
2. Enter your username and password.
3. On the router’s interface page, click Wireless.
4. Under Wireless > Basic Wireless Settings page, select Manual.
5. Find the Password and change it to your desired characters. (Always keep your password in a safe place)

Password Recovery

If you forgot your Linksys WRT120N Login Password, don’t worry. You can reset the password and reboot the router to factory default settings. Please make sure that:

• The device is connected with a cable or DSL modem before restarting it.
• The login page of the wireless router will display when rebooting.

To perform this:

1. Press and hold the Reset button for 30 seconds (use a paper clip).
2. Power off, then power on again to start the recovery process.
3. This process will clear all settings back to factory defaults mode.
4. You may now log in again using the default login.

Tips Before Logging Into Your Linksys WRT120N

Place your router in a central location.

First of all, do not plug in the router before taking care of a few essential things. It is vital to place your router in a central location to cover the maximum area and get strong signals on both floors.

The ideal option is to put a wireless router at the center. You may set the router on the upper level of the building instead of the basement or ground floor. Make sure there are no obstructions like walls between your computer and Linksys WRT120N once set up since these may interfere with signal transmission leading to weak signals or dropped connections.

Avoid placing the router near metal objects.

Avoid placing your router near metal objects like iron boxes, ovens, or microwaves since these may cause signal reflection leading to poor connection.

Avoid putting the router near the bathroom or kitchen.

Keep your router away from areas near bathroom fixtures since these appliances give off solid electromagnetic waves that may interfere with wireless signals. Placing the device in the kitchen is not a good idea either because kitchens are soaked in humidity and tend to be warm, which causes poor performance of devices like routers. Avoid placing it on top of the refrigerator as well.

Position your antenna properly.

The proper position of the antenna is also another factor that affects the overall performance of your router. The antenna should be installed to gain maximum signal strength, which means if you are using non-standard antennas, they may have to be replaced with factory-made ones for optimal results.

2 Ways to Connect to the Network

After you’ve finished placing the router, it’s time to connect it to the network. You cannot begin logging in if your router is not linked to the internet; you cannot begin logging in. You cannot start logging in, so secure your router before proceeding.

Connect via Ethernet Cable

To perform this:

1. Make sure your router is ON.
2. Locate your router’s ethernet port on the back.
3. Insert the Ethernet cable and make sure it’s properly positioned.
4. After that, check your computer to see whether it is successfully connected.

Connect Wirelessly

To perform this:

1. Check if the router is turned on and correctly linked to a modem.
2. Check for Wi-Fi connection on another device or PC in the home to ensure that it is broadcasting its SSID.
3. Find and choose the router’s network.
4. Enter your Wi-Fi password and then click Connect.

Now that you’ve successfully connected to the internet, you can log in to your router and use some of the router’s essential functions. If you want to change any settings on your router, logging in is the way to go.

Security Tips

• Password secures all network PCs and protects critical files separately.
• Change your passwords frequently.
• Set up anti-virus and personal firewall software.
• Turn off file sharing (peer-to-peer). Some apps may open file sharing without your knowledge or permission.

FAQs

1. What will happen if I do not change my password and SSID?

Malware may be introduced to your network, leading to identity theft, corruption of data, or other damage.

2. What security can you recommend to protect my router?

Set up anti-virus and personal firewall software at all PCs on the wireless network and use encryption (WPA). You should also protect critical files separately with passwords across all computers in their respective folders.

3. Is it possible for an outsider to access my router’s interface?

No, they must know both your SSID and WEP/WAP key before they gain access via the web browser.

4. How can I reset my Linksys WRT120N?

With the power on, hold the reset button for 30 seconds. Then unplug the Linksys WRT120N router while keeping the reset hold until you plug the router in the socket. Let go of the reset button after plugging in. 

5. Is the built-in security of Linksys WRT120N reliable?

Yes, as long as you set the Linksys WRT120N correctly, you are all good. 

Conclusion

It is indeed that setting up the Linksys WRT120N is relatively easy. However, it is almost always better to err on the side of caution when dealing with something that has to do with your network’s security. We hope you found this article helpful. We encourage you to share it with your friends or family members who may be having similar problems.